TruPrint 3000


Flexible solution for industrial additive manufacturing

The TruPrint 3000 is a universal medium-format machine (LMF / PBF / LPBF) with industrial part and powder management. You immediately benefit from even more flexibility, quality and productivity for your additive series production: you will now receive the TruPrint 3000 metal 3D printer with two 500-watt TRUMPF lasers in the full-field multilaser option as well.

  • Productivity is almost doubled, independent of the component geometry, and the part costs are significantly decreased. Automatic monitoring and calibration of the multilasers during the build job facilitates optimum quality for printed multilaser components. The latest developments in shielding gas control additionally increase the component quality and reproducibility of the parts.
  • This is documented parallel to the build job thanks to Melt Pool Monitoring. It means that the burden of proof, for example in the medical sector, can be satisfied.
  • The TruPrint 3000 is extremely flexible in adapting to the individual requirements of our customers. It is used in the most varied of sectors with its build volume comprising a diameter of 300 mm and a height of 400 mm.

Depending on the size and complexity of the component, your preference in the workflow and the production volume, you can be flexible in your selection between internal or external powder removal – with both processes using shielding gas. With the latter, you also minimize the 3D printer’s downtime thanks to parallel to production operation.


Discover what makes the new TruPrint 3000 so special

High level of process robustness

High level of process robustness

  • Consistent component quality thanks to a newly developed shielding gas stream

Full-field multilaser 2 x 500 watts

Full-field multilaser 2 x 500 watts

  • Simultaneous laser exposure to the entire build volume for maximum productivity gain

Flexible production setup

Flexible production setup

  • Thanks to different machine and periphery configurations for part and powder management

Extensive monitoring solutions

Extensive monitoring solutions

  • Ensuring high quality standards during the build job thanks to Melt Pool Monitoring


  • Absorber Cooler
  • A wide range of application possibilities
  • Series production with the TruPrint 3000
  • General industry
  • Energy & Turbine

Technical Data

Build Volume (Cylinder)

Diameter 300 mm x 400 mm Height

Processable Materials

Metal powders for welding, such as stainless steels, tool steels, and aluminum alloys, nickel-based alloys, or titanium alloys. Current availability of materials and their parameters available on request.

Preheating (Standard)

Up to 200 °C

Maximum Laser Power At The Workpiece (Trumpf Fiber Laser)

500 W

Beam Diameter (Standard)

80 μm

Layer Thickness

20 - 150 μm

Build Rate

5 - 120 cm³/h

Minimum Measurable Oxygen Level

Up to 100 ppm

Connection And Consumption
Electrical Connection (Voltage)

400/460 V

Electrical Connection (Current Intensity)

32 A

Electrical Connection (Frequency)

50/60 Hz

Shielding Gas

Nitrogen, argon

Structural Design
Dimensions (Including Filter) (W X H X D)

3385 mm x 1750 mm x 2070 mm

Weight (Including Powder)

4300 kg

Book a Demo